I was feeling fairly pleased.
And then I got tired, and lazy, and sick. But mostly tired and lazy. I usually seem to hit a spot in the build where I've worked so hard that I don't want to touch it for a while. In this case...yeah I got a lot done.
So...no more excuses... Pictures!
|The chimney with some cardboard to pad it out.|
So the chimney is going to cover my cheats and wiring mess. Cool huh?
So I needed to build it up a bit. Wrapped some cardboard around it. and made sure it would move.
|Different angle with my cardboard taped on.|
|Here we are testing the look and fit.|
|It actually worked pretty well...I was worried it wouldn't stick.|
|It looked pretty good...even the angled part.|
|Yeah I'm suddenly not so sure about this.|
It involved a lot of cursing. And some maneuvering and regluing but...in the end...it worked. I think. See what you guys think.
|Shown here when I added the trim to the house.|
So I started with the porch...
|There was one little issue with the front porch. (Only one since Tali was supervising.)|
|Teeny tiny little pieces...OMG it seemed like there were tons!|
There was also this little issue of the roof coming up and requiring that it be reglued. That was a fun little diversion. Not!
But eventually I got them all up there. And then started on the sides of the house and the eaves there. All of the supports had to be added before I could add the trim.
|Doesn't look too bad does it?|
The results were pretty good though, even if I do say so myself.
|Painstaking! More like pain in the butt...or back...you know from the leaning.|
And then I added the trim to the sides of the roof and under the eaves. By the way, these did not come precut with the angles. That was all me. Again, not my favorite pastime!
And you can see below my extremely sophisticated method of making sure everything stays in place while the glue sets.
|If you were surprised I referred to binder clips as sophisticated you clearly don't know me that well.|
So here are a few more shots with all the trim on the house. The angles were tough! But I got 'em done.
|A little blurry but there are two pieces of angled trim. One under the roof edge and one on the roof edge.|
|Not too bad right?|
|This is without the side dormer trim but you get the idea right? Please say you do. Please?|
One last pic of everything taped up while the glue sets for the trim. Very glamorous right?
|But it looks real pretty too. I love the front door. Nice little pop!|
The roof. Remember how I was agonizing about the roof? And how much I wanted to avoid shingles again? I mean seriously, maybe it wouldn't have been so bad but I just really didn't wanna. You know? Laziness was taking over whenever I thought about dying and then gluing and sanding shingles.
I was thinking of doing a roof like this...its fairly common in Texas actually. I usually see them in blue or tan.
And once I read how Otterine had done it I decided that I really liked the idea. Soo...I ordered strips of basswood from Hobby Lobby. Four packages I think, of the one eighth by one sixteenth strips.
And I got started.
|I was still waiting for the trim to set on the dormer but I got started anyway.|
And I decided that since the porch supports were a certain measurement apart (it escapes me at the moment) that I'd just match the roof lines up to them. I used plain old Elmer's Glue and wiped off the excess with water. I had to hold the wood down until it stuck but there wasn't any need for tape to keep it in place. The back was a different story but it worked out eventually.
It seemed to work pretty well.
|Not too bad right? You can just see my color strip where I'm debating my shades of brown for the roof.|
I managed to get everything lined up nice and neat, front and back and get the center rail on nicely. That was a little tricky but finally I managed to get it done.
|Lines up with the porch eaves...so that's kinda cool.|
Still...the painting didn't come out too badly. See?
|It looks good with the brick and the white/blue of the house.|
I did a little...aging.
Here are a few detail shots.
|See? It looks like an old roof with the dark stuff getting washed down the slopes.|
But here's a picture of the back... I couldn't just ignore it could I?
|I think it looks pretty good. Had to be careful to not drip the aging wash onto the pretty floors.|
Which was again...painstaking and laborious... yeesh. My back was so glad when I was done.
|Nice clean white trim...|
I'd been wanting to work on a backsplash for the stove. So I messed around with that for a bit. I made a template and started to fool around with some of the beads I wanted to use for tiles.
|Not too bad looking I think.|
|I used Sticky Tacky glue to hold them to the cardboard.|
I also did some work on some furniture... I wanted some simple things, one end table for the living room downstairs and also a bedside table to set one of the lamps on in the bedroom.
So I had some wooden cubes from Joann's and I cut a square hole in the side of one of them. By the way, don't try to use your fingers to hold a saw blade. If they're sharp enough to poke and saw through wood they're sharp enough to slice your fingers, even if you aren't holding the jagged side.
But I triumphed and voila!
|It needs a little touching up but I like it.|
|It looks a little too dark to me so I may have to fiddle with it some more.|
But we also got a few more friends. Some of them might move into the Gothic Victorian. But some will stay here. They're having a lot of fun playing around the big room.
|A few too many critters for this house. It's not big enough for so many cats!|
|Someone wants up but there isn't enough room.|
|And the bedside table is the perfect hiding place for a nap.|
|Uh oh, someone had better not get ideas about that lamp!|
|Why are cats always fascinated by the bathroom? Especially the tub?|
But so far everything seems to be going fine. I'm working on finishing the bathroom next. I just need to find some mini curtain rod holders...or something made to hold conduits in place so I can get the shower held in place along with the shower curtain. I've got some thick metal jewelers wire that'll serve as the curtain rod nicely. Just nothing to hold it up to the walls. Wish me luck!